Electrostatic Discharge; Batteries; Safety; Disposal - Cisco GS7000 Installation And Operation Manual

Electrostatic Discharge

In Norway, due to regulation for installations of cable distribution systems, and in Sweden, a galvanic
Note
isolator shall provide electrical insulation below 5 MHz. The insulation shall withstand a dielectric strength
of 1,5 kV r.m.s., 50 Hz or 60 Hz, for 1 min.
Translation to Norwegian (the Swedish text will also be accepted in Norway):
Utstyr som er koplet til beskyttelsesjord via nettplugg og/eller via annet jordtilkoplet utstyr – og er tilkoplet
et kabel-TV nett, kan forårsake brannfare. For å unngå dette skal det ved tilkopling av utstyret til kabel-TV
nettet installeres en galvanisk isolator mellom utstyret og kabel- TV nettet.
Translation to Swedish:
Utrustning som är kopplad till skyddsjord via jordat vägguttag och/eller via annan utrustning och samtidigt
är kopplad till kabel-TV nät kan i vissa fall medfőra risk főr brand. Főr att undvika detta skall vid anslutning
av utrustningen till kabel-TV nät galvanisk isolator finnas mellan utrustningen och kabel-TV nätet.
Electrostatic Discharge
Electrostatic discharge (ESD) results from the static electricity buildup on the human body and other objects.
This static discharge can degrade components and cause failures.
Take the following precautions against electrostatic discharge:
• Use an anti-static bench mat and a wrist strap or ankle strap designed to safely ground ESD potentials
• Keep components in their anti-static packaging until installed.
• Avoid touching electronic components when installing a module.

Batteries

This product may contain batteries. Special instructions apply regarding the safe use and disposal of batteries:

Safety

• Insert batteries correctly. There may be a risk of explosion if the batteries are incorrectly inserted.
• Do not attempt to recharge 'disposable' or 'non-reusable' batteries.
• Please follow instructions provided for charging 'rechargeable' batteries.
• Replace batteries with the same or equivalent type recommended by manufacturer.
• Do not expose batteries to temperatures above 100°C (212°F).

Disposal

• The batteries may contain substances that could be harmful to the environment.
Cisco GS7000 Super High Output Intelligent Node Installation and Operation Guide
xiv
through a resistive element.
Preface