Cisco Gs7000 Super High Output Intelligent Node Installation And Operation Guide - Cisco GS7000 Installation And Operation Manual

Maintenance
The screw locations are identified by number, 1 through 7.
Note
5 Insert a flat-blade screwdriver into the small holes in the metal handles on each side of the RF amplifier
assembly and pry up carefully to disconnect the RF amplifier assembly's rear panel connectors.
Be careful not to damage the housing with the screwdriver.
Important
6 Grasp the two metal handles on the RF amplifier assembly and carefully lift the RF assembly out of the
housing.

Cisco GS7000 Super High Output Intelligent Node Installation and Operation Guide

RF Amplifier Assembly Replacement Procedure
41