Warning: Fiber Optic Cables; Safe Operation For Software Controlling Optical Transmission Equipment; Laser Warning Labels - Cisco GS7000 Installation And Operation Manual

Super high output intelligent node
Table of Contents

Advertisement

Preface

Warning: Fiber Optic Cables

Warning
Avoid personal injury! Qualified service personnel may only perform the procedures in this manual. Wear
safety glasses and use extreme caution when handling fiber optic cables, particularly during splicing or
terminating operations. The thin glass fiber core at the center of the cable is fragile when exposed by the
removal of cladding and buffer material. It easily fragments into glass splinters. Using tweezers, place
splinters immediately in a sealed waste container and dispose of them safely in accordance with local
regulations.
Warning
Eye injury can occur - do not pull optical connector or look into the connector or the fiber cable while the
node is energized.

Safe Operation for Software Controlling Optical Transmission Equipment

If this manual discusses software, the software described is used to monitor and/or control ours and other
vendors' electrical and optical equipment designed to transmit video, voice, or data signals. Certain safety
precautions must be observed when operating equipment of this nature.
For equipment specific safety requirements, refer to the appropriate section of the equipment documentation.
For safe operation of this software, refer to the following warnings.
Warning
• Ensure that all optical connections are complete or terminated before using this equipment to remotely
• Allow only personnel trained in laser safety to operate this software. Otherwise, injuries to personnel
• Restrict access of this software to authorized personnel only.
• Install this software in equipment that is located in a restricted access area.

Laser Warning Labels

One or more of the labels shown below are located on this product.
control a laser device. An optical or laser device can pose a hazard to remotely located personnel
when operated without their knowledge.
may occur.
Cisco GS7000 Super High Output Intelligent Node Installation and Operation Guide
Warning: Fiber Optic Cables
xvii

Advertisement

Table of Contents
loading

Table of Contents