Set Up Wavelink Settings - Cisco 7925G Administration Manual

Unified wireless ip phone
Hide thumbs Also See for 7925G:
Table of Contents

Advertisement

Cisco Unified Wireless IP Phone 7925G, 7925G-EX, and 7926G Web Pages
Item
Preserve Logs
Reset Trace Settings upon
Reboot
Related Topics
Access Phone Web Page, on page 69
Network Profiles, on page 74
Set Up USB Settings on PC, on page 95
System Settings, on page 104

Set Up Wavelink Settings

The Cisco Unified Wireless IP Phone supports the use of the Wavelink Avalanche server to configure the
phone, which can be set up as a Wavelink Avalanche client device. Configuration Utility for Wavelink
Avalanche can be installed on the Wavelink Avalanche server to configure a single phone or multiple phones
with common settings. For more information, see
You can use the phone web page to assign attributes to the phone that can be used to distinguish it from other
mobile devices connected to the Wavelink server. These attributes can be used as search criteria for locating
phones on the Wavelink server. For example, the predefined ModelName parameter with a value of CP7925G
identifies a device as a Cisco Unified Wireless IP Phone 7925G or Cisco Unified Wireless IP Phone 7925G-EX,
while CP7926 identifies a device as a Cisco Unified Wireless IP Phone 7926G.
By default, the parameters are configured as follows:
• ModelName = CP7925 or CP7926
• EnablerVer = 3.11-01
Note
For more information about using the Wavelink Avalanche server, see
on page
To configure Wavelink parameters using the phone web page, follow these steps:
Description
True: Save trace logs after powering off the phone
False: Delete trace logs
You can enable debugging by configuring various settings on the Trace
Configuration. These options determine how trace settings are handled
when you reboot:
134.
Cisco Unified Wireless IP Phone 7925G, 7925G-EX, and 7926G Administration Guide
• Yes: Default value. Settings will be reset to the default values upon
reboot.
• No: Trace settings will not reset upon reboot.
Wavelink Avalanche Server, on page
Set Up Wavelink Settings
133.
Wavelink Server IP Address Setup,
99

Advertisement

Table of Contents
loading

This manual is also suitable for:

7925g-ex7926g

Table of Contents