Network Settings
Network setting
IP Address
Subnet Mask
Default Router 1
Domain Name
DNS Server 1
DNS Server 2
Alternate TFTP
TFTP Server 1
TFTP Server 2
Load Server
CDP Enabled
Erase
Configuration
Handset Only
Mode
Cisco Unified Wireless IP Phone 7925G, 7925G-EX, and 7926G Administration Guide
120
Description
Internet Protocol (IP) address of the phone.
Subnet mask used by the phone.
Primary gateway used by the phone.
Name of the Domain Name System (DNS)
domain in which the phone resides.
Primary DNS server used by the phone.
Optional backup DNS server used by the
phone.
Yes: This option assigns an alternative
Trivial File Transfer Protocol (TFTP) server.
No: This option uses the TFTP server
assigned by DHCP.
IP address for the primary TFTP server used
by the phone. If you set Alternate TFTP
option to Yes, you must enter a nonzero
value for this option.
Optional backup TFTP server that the phone
uses if the primary TFTP server is not
available.
IP address for the server where the phone
receives firmware updates.
Enables or disables Cisco Discovery Protocol
(CDP) for the phone in Cisco Unified
Communications Manager Administration.
Deletes the phone configuration and sets to
factory defaults.
Yes: Indicates that the speakerphone is
disabled on the phone.
No: Indicates that the speakerphone is
enabled on the phone.
Cisco Unified Wireless IP Phone 7925G, 7925G-EX, and 7926G Settings
For more information, see..
DHCP Settings, on page 121
Set Alternate TFTP Server, on page 122
Cisco Unified Communications Manager
Administration Guide
Change Cisco Discovery Protocol
Settings, on page 123
Cisco Unified Communications Manager
Administration Guide
Product-Specific Fields for Cisco Unified
Wireless IP Phone 7925G, 7925G-EX,
and 7926G, on page 162