Status Messages - Cisco 7925G Administration Manual

Security, Device, Model, Status, and Call Statistics Information

Status Messages

Table 39: Status Messages, Description, Possible Explanation, and Action
Status message Description
Bad MIC on phone The manufacturing installed
certificate (MIC) that is used for
security features is corrupted.
CFG file not found Neither the name-based configuration
file nor default configuration file
were not found on the TFTP Server.
CTL Installed A certificate trust list (CTL) file is
installed in the phone.
CTL update failed The phone could not update its
certificate trust list (CTL) file.
Duplicate IP Another device is using the IP
address assigned to the phone.
LCS operation failed The locally significant certificate
(LSC) that is used for the security
features did not install properly.
Possible explanation and action
For information about how to manage the MIC for your phone, see the
"Using the Certificate Authority Proxy Function" chapter in
Cisco Unified Communications Manager Security Guide.
The configuration file for a phone is created when the phone is added
to the Cisco Unified Communications Manager database. If the phone
has not been added to the Cisco Unified Communications Manager
database, the TFTP server generates a CFG File Not Found response.
• Phone is not registered with Cisco Unified Communications
Manager.
You must manually add the phone to
Cisco Unified Communications Manager if you are not allowing
phones to autoregister. See
Manager Phone Addition Methods, on page 48
• If you are using DHCP, verify that the DHCP server is pointing
to the correct TFTP server.
• If you are using static IP addresses, check configuration of the
TFTP server. See
on assigning a TFTP server.
None. This message is informational only.
For more information about the CTL file, see Cisco Unified
Communications Manager Security Guide.
Problem with the CTL file on the TFTP server.
For more information, see Cisco Unified Communications Manager
Security Guide.
• If the phone has a static IP address, verify that you have not
assigned a duplicate IP address. See
page 92 section for details.
• If you are using DHCP, check the DHCP server configuration.
For information about how to manage the LSC for your phone, see the
"Using the Certificate Authority Proxy Function" chapter in
Cisco Unified Communications Manager Security Guide.
Cisco Unified Wireless IP Phone 7925G, 7925G-EX, and 7926G Administration Guide
View Status Messages Screen
Cisco Unified Communications
IP Network Settings, on page 92
IP Network Settings, on
for details.
for details
187