Cisco 7925G Administration Manual page 219

Unified wireless ip phone
Hide thumbs Also See for 7925G:
Table of Contents

Advertisement

Remote Monitoring
Item
SRST Reference Option
Connection Monitor
Duration
MLPP Information
MLPP Domain ID
MLPP Indication Status
Preemption
QoS Information
DSCP for Call Control
DSCP for Configuration
DSCP for Services
Security Information
GARP Enabled
Web Access Enabled
Settings Enabled
Security Mode
URL Information
Description
Identifies the default gateway or disables SRST.
The amount of time that the IP phone monitors its connection to Cisco Unified
Communications Manager before it unregisters from SRST and reregisters to
Cisco Unified Communications Manager.
Identifies the MLPP Domain that is assigned to the phone.
Indicates whether the phone uses special precedence rings and tones.
Identifies call preemption capability set for this phone.
Forceful
The phone allows higher priority calls to preempt lower priority calls.
Disabled
The phone does not preempt lower priority calls with higher priority
calls.
Default
The phone uses the device pool setting.
Differentiated Services Code Point (DSCP) IP classification for call control
signaling.
DSCP IP classification for any phone configuration transfer.
DSCP IP classification for phone-based service.
Indicates whether the phone learns MAC addresses from Gratuitous ARP
responses.
Indicates whether access to phone web pages is enabled (Yes) or disabled
(No).
Indicates whether the Settings menu on the phone is accessible.
Indicates the security mode assigned to the phone
Cisco Unified Wireless IP Phone 7925G, 7925G-EX, and 7926G Administration Guide
Network Setup Information
199

Advertisement

Table of Contents
loading

This manual is also suitable for:

7925g-ex7926g

Table of Contents