Set Up Authentication Mode; Cisco Unified Wireless Ip Phone 7925G, 7925G-Ex, And 7926G Administration Guide - Cisco 7925G Administration Manual

Wireless LAN Security
Authentication mode
Open plus WEP
Shared Key plus WEP
LEAP (with optional
CCKM)
EAP-FAST (with optional
CCKM)
EAP-TLS (with optional
CCKM)
PEAP (with optional
CCKM)
Auto (AKM) with CCKM
Auto (AKM) with WPA
(with optional CCKM)
Auto (AKM) with WPA2
(with optional CCKM)
Auto (AKM) with WPA
Pre-Shared Key
Auto (AKM) with WPA2
Pre-Shared Key

Set Up Authentication Mode

To select the Authentication Mode for this profile, follow these steps:
Procedure
Step 1
Choose the network profile that you want to configure.
Step 2 Choose the authentication mode.
Note

Cisco Unified Wireless IP Phone 7925G, 7925G-EX, and 7926G Administration Guide

82
Wireless encryption
Static WEP
Requires WEP Key
Static WEP
Requires WEP Key
Uses WEP, TKIP or AES
Uses WEP, TKIP or AES
Uses WEP, TKIP, or AES
Uses WEP, TKIP, or AES
Uses TKIP or AES
Uses TKIP
Uses AES
Uses TKIP
Uses AES
Depending on what you selected, you must configure additional options in Wireless Security or
Wireless Encryption. See Wireless LAN Security, on page 80
Cisco Unified Wireless IP Phone 7925G, 7925G-EX, and 7926G Web Pages
Wireless security credentials
Requires a WEP key
Requires a WEP key
Requires Username and Password
Requires Username and Password
Requires Username and Password
Requires server and client certificates
Requires Username and Password
A server certificate to enable server
validation is optional.
Requires Username and Password
Requires Username and Password
Requires Username and Password
Requires Passphrase
Requires Passphrase
for more information.