Set Up Product-Specific Options - Cisco 7925G Administration Manual

Features, Templates, Services, and Users
Parameter Options
Bar Code Basic or extended
Symbology Group
Default: basic
Scanner Commands
Minimum Ring Default: 0
Volume
Java Default: Enabled

Set Up Product-Specific Options

To configure product-specific options, follow these steps.
Procedure
Step 1 From Cisco Unified Communications Manager Administration, choose Device > Phone.
Step 2
Perform one of the following actions:
• For Cisco Unified Communications Manager 4.x or earlier, click Add a Phone.
• For Cisco Unified Communications Manager 5.0 and later, click Add Phone.
Step 3 Choose Phone Type > Cisco7925.
Step 4 In the Phone Configuration page, locate the Product Specific Configuration area.
Step 5
Make changes to the settings as needed. See
7925G, 7925G-EX, and 7926G, on page 162
Note
Step 6 Check the Override Common Settings check box to override higher level configuration settings for that
feature.
Step 7
Reset the phone to make the changes take effect.
Disable Java
You can disable Java on the phones if you do not deploy Java applications. Disabling Java frees up phone
memory for other tasks. By default, Java is enabled.
Description
Specifies the symbology the scanner uses to scan barcodes. Select either basic or
extended depending on the barcode types being used. Available only on the Cisco
Unified Wireless IP Phone 7926G.
Allows you to specify multiple commands for barcode scanner features. For more
information, see the Java MIDlet Developers Guide for Cisco Unified IP Phones and
the Cisco IP Phone Services MIDlet Software Development Kit. Available only on the
Cisco Unified Wireless IP Phone 7926G.
If a user does not have access to the phone configuration menus, this setting controls
the minimum ring volume a user can adjust the volume to.
Indicates whether the Java on the phone is enabled or disabled.
For detailed information about these settings, click the I or ? button for Product Specific Configuration
Help.
Cisco Unified Wireless IP Phone 7925G, 7925G-EX, and 7926G Administration Guide
Product-Specific Fields for Cisco Unified Wireless IP Phone
for a description of the fields.
Set Up Product-Specific Options
165