Change Usb Port Setup - Cisco 7925G Administration Manual

Cisco Unified Wireless IP Phone 7925G, 7925G-EX, and 7926G Settings
Procedure
Step 1 Obtain the CAPF authentication string that was set when the CAPF was configured.
Step 2 Choose SETTINGS > System Configuration > Security.
Step 3 Press * * # to unlock the option.
Step 4
Scroll to LSC and press Update.
The phone prompts for an authentication string.
Step 5 Enter the authentication string and press Submit.
The phone begins to install, update, or remove the LSC, depending on how the CAPF was configured. During
the procedure, a series of messages appears in the LSC option field in the Security Configuration menu so
that you can monitor progress. When the procedure completes successfully, the phone will display Installed
or Not Installed.
The LSC install, update, or removal process can take a long time to complete. You can stop the process at
any time by pressing Stop from the Security Configuration menu. Settings must be unlocked before you can
press this softkey.
When the phone successfully completes the installation procedure, it displays Success. If the phone displays
Failed, the authorization string may be incorrect or the phone may not be enabled for upgrading. See the
error messages generated by the CAPF and take appropriate actions.
Step 6
To verify that an LSC is installed on the phone, choose SETTINGS > System Configuration > Security.
The LSC displays Installed.
Related Topics
Security Features, on page 14

Change USB Port Setup

When using the USB cable to configure a phone, you might need to change the USB configuration. The phone
has a default USB IP address of 192.168.1.100 that you can use with the USB connection to the PC. If you
need to change the USB port configuration, these options are available:
• Obtain the IP address automatically, by getting an IP address from the PC with DHCP set up.
• Use the IP address and subnet mask assigned in your area.
To view or configure the USB port configuration on a Cisco Unified Wireless IP Phone, follow these steps:
Procedure
Step 1 Choose SETTINGS > System Configuration > USB.
Step 2 To open the menu, press the Select button.
Step 3 Press * * # to unlock the menu.
Step 4
To configure DHCP, press Select and choose one of these options:
Cisco Unified Wireless IP Phone 7925G, 7925G-EX, and 7926G Administration Guide
Change USB Port Setup
131