Virtual Outputs - GE D30D00HCHF8AH6AM6BP8BX7A Instruction Manual

6 ACTUAL VALUES
For form-A contact outputs, the state of the voltage and current detectors is displayed as Off, VOff, IOff, On, IOn,
and VOn. For form-C contact outputs, the state is displayed as Off or On.
NOTE

PATH: ACTUAL VALUES STATUS
 VIRTUAL OUTPUTS

MESSAGE
MESSAGE
The present state of up to 96 virtual outputs is shown here. The first line of a message display indicates the ID of the virtual
output. For example, 'Virt Op 1' refers to the virtual output in terms of the default name-array index. The second line of the
display indicates the logic state of the virtual output, as calculated by the FlexLogic equation for that output.

PATH: ACTUAL VALUES STATUS
 AUTORECLOSE 1

The automatic reclosure shot count is shown here.
a) STATUS

PATH: ACTUAL VALUES STATUS
 REMOTE DEVICES
 STATUS
MESSAGE
MESSAGE
MESSAGE
The present state of the programmed remote devices is shown here. The
whether or not all programmed remote devices are online. If the corresponding state is "No", then at least one required
remote device is not online.
GE Multilin


VIRTUAL OUTPUTS

Virt Op 1
Off
Virt Op 2
Off
↓
Virt Op 96
Off
 
AUTORECLOSE AUTORECLOSE 1
AUTORECLOSE 1
SHOT COUNT:

REMOTE DEVICES STATUS
All REMOTE DEVICES
ONLINE: No
REMOTE DEVICE 1
STATUS: Offline
REMOTE DEVICE 2
STATUS: Offline
↓
REMOTE DEVICE 16
STATUS: Offline
D30 Line Distance Protection System
Range: On, Off
Range: On, Off
Range: On, Off
Range: 0, 1, 2, 3, 4
0
Range: Yes, No
Range: Online, Offline
Range: Online, Offline
Range: Online, Offline
ALL REMOTE DEVICES ONLINE
6.2 STATUS
6.2.7 VIRTUAL OUTPUTS
6.2.8 AUTORECLOSE
6.2.9 REMOTE DEVICES
message indicates
6-5
6