GE D30D00HCHF8AH6AM6BP8BX7A Instruction Manual page 150

5.2 PRODUCT SETUP
Multiple LANS, with Redundancy
The topology in the following figure provides local configuration/monitoring through EnerVista software and access to the
public network shared on LAN1, to which port 1 (P1) is connected. There is no redundancy provided on LAN1. Communica-
tions to SCADA is provided through LAN2. P2 and P3 are connected to LAN2, where P2 is the primary channel and P3 is
the redundant channel. In this configuration, P3 uses the IP and MAC address of P2.
5
Multiple LANS, No Redundancy
The following topology provides local configuration/monitoring through EnerVista software on LAN1, to which port 1 (P1) is
connected, access to the public network on LAN2, to which port 2 (P2) is connected and communications with SCADA on
LAN3, to which port 3 (P3) is connected. There is no redundancy.
5-24
Figure 5–4: MULTIPLE LANS, WITH REDUNDANCY
Public Network
EnerVista Software
LAN1
ML3000
P1
IP1/
MAC1
Figure 5–5: MULTIPLE LANS, NO REDUNDANCY
Public Network
EnerVista Software
LAN1
ML3000
P1
IP1/
MAC1
D30 Line Distance Protection System
SCADA
LAN2
LAN2
ML3000 ML3000
P2 P3
IP2/ IP2/
MAC2 MAC2
Redundancy mode
UR
859709A4.vsd
SCADA
LAN2
LAN3
ML3000 ML3000
P2 P3
IP2/ IP3/
MAC2 MAC3
UR
859710A2.vsd
5 SETTINGS
GE Multilin