Table of Contents
Advertisement
4.2 EXTENDED ENERVISTA UR SETUP FEATURES
Once the template has been applied, users are limited to view and edit the FlexLogic entries not locked by the template.
The effect of applying the template to the FlexLogic entries in the above procedure is shown below.
Typical FlexLogic™ entries without template applied.
4
Figure 4–8: LOCKING FLEXLOGIC ENTRIES THROUGH SETTING TEMPLATES
The FlexLogic entries are also shown as locked in the graphical view (as shown below) and on the front panel display.
b) LOCKING FLEXLOGIC EQUATIONS TO A SERIAL NUMBER
A settings file and associated FlexLogic equations can also be locked to a specific UR serial number. Once the desired
FlexLogic entries in a settings file have been secured, use the following procedure to lock the settings file to a specific serial
number.
1.
Select the settings file in the offline window.
2.
Right-click on the file and select the Edit Settings File Properties item.
4-10
Figure 4–9: SECURED FLEXLOGIC IN GRAPHICAL VIEW
D30 Line Distance Protection System
Typical
FlexLogic™ entries
locked with template via
the
Template Mode > View In Template Mode
4 HUMAN INTERFACES
command.
842861A1.CDR
GE Multilin
Advertisement
Table of Contents
