Xconfiguration Audio Input Hdmi [N] Mode; Xconfiguration Audio Input Line [1 - Cisco TelePresence MX700 Reference Manual

Cisco TelePresence MX700 and MX800

Introduction

xConfiguration Audio Input HDMI [n] Mode

This setting applies to HDMI [2..3] for single camera systems, and to HDMI [3] for dual camera
systems.
Define if the audio channels on the HDMI input shall be enabled. The HDMI inputs have two
audio channels.
Requires user role: ADMIN
Default value: On
USAGE:
xConfiguration Audio Input HDMI
where
Mode
: Off/On
Off: Disable audio on the HDMI input.
On: Enable audio on the HDMI input.
xConfiguration Audio Input Line [1..4] Equalizer ID
Select the equalizer ID of the audio source that is connected to the line input.
Requires user role: ADMIN
Default value: 1
USAGE:
xConfiguration Audio Input Line
where
ID
: Integer (1..8)
Set the equalizer ID.
Cisco TelePresence MX700 and MX800 API Reference Guide CE8.0, FEBRUARY 2016.
D15335.02
About the API xConfiguration xConfiguration
n Mode: Mode
Equalizer ID:
n ID
xCommand
xConfiguration Audio Input Line [1..4] Equalizer Mode
Define the equalizer mode for the audio source that is connected to the line input.
Requires user role: ADMIN
Default value: Off
USAGE:
xConfiguration Audio Input Line
where
Mode
: Off/On
Off: No equalizer.
On: Enable the equalizer for the audio source that is connected to the line input.
xConfiguration Audio Input Line [1..4] VideoAssociation MuteOnInactiveVideo
The audio source can be associated with a video source on the video input connector, and
you can determine whether to play or mute audio depending on whether the video source is
presented or not. By default, audio is not muted.
Requires user role: ADMIN
Default value: Line [1, 2]: On Line[3, 4]: Off
USAGE:
xConfiguration Audio Input Line
MuteOnInactiveVideo
where
MuteOnInactiveVideo
: Off/On
Off: The audio source is not associated with a video source. The audio will be played
locally and to far end regardless of whether the video source is presented.
On: The audio source is associated with a video source. The audio will be played
(locally and to far end) when the associated video source is presented. The audio will
be muted when the video source is not presented.
37
API Reference Guide
xStatus Appendices
n Equalizer Mode: Mode
n VideoAssociation MuteOnInactiveVideo:
Copyright © 2016 Cisco Systems, Inc. All rights reserved.