Xconfiguration Audio Input Microphone [1; Xconfiguration Audio Output Line [1] Delay Delayms; Xconfiguration Audio Output Line [1] Delay Mode - Cisco TelePresence SX10 Reference Manual

Cisco TelePresence SX10

Introduction
xConfiguration Audio Input Microphone [1..2] Mode
Disable or enable audio on the microphone connector. Note that Microphone [1] is the video
system's internal microphone.
Requires user role: ADMIN, INTEGRATOR
Default value: On
USAGE:
xConfiguration Audio Input Microphone
where
: Unique ID that identifies the microphone input. Range: 1..2
n
: Off/On
Mode
Off: Disable the audio input microphone connector.
On: Enable the audio input microphone connector.

xConfiguration Audio Output Line [1] Delay DelayMs

To obtain lip-synchronization, you can configure each audio line output with an extra delay that
compensates for delay in other connected devices, for example TVs and external loudspeak-
ers. The delay that you set here is either fixed or relative to the delay on the HDMI output, as
defined in the Audio Output Line [n] Delay Mode setting.
Requires user role: ADMIN, INTEGRATOR
Default value: 0
USAGE:
xConfiguration Audio Output Line
where
: Unique ID that identifies the audio line output. Range: 1..6
n
: Integer (0..290)
DelayMs
The delay in milliseconds.
Cisco TelePresence SX10 API Reference Guide CE9.1, JUNE 2017.
D15333.07
About the API xConfiguration xConfiguration
n Mode: Mode
n Delay DelayMs: DelayMs
xCommand

xConfiguration Audio Output Line [1] Delay Mode

You may add extra delay to an audio line output with the Audio Output Line [n] Delay DelayMs
setting. The extra delay added is either a fixed number of milliseconds, or a number of millisec-
onds relative to the detected delay on the HDMI output (typically introduced by the connected
TV).
Requires user role: ADMIN, INTEGRATOR
Default value: RelativeToHDMI
USAGE:
xConfiguration Audio Output Line
where
: Unique ID that identifies the audio line output. Range: 1..6
n
: Fixed/RelativeToHDMI
Mode
Fixed: Any extra delay (DelayMs) added to the output, will be a fixed number of
millisecond.
RelativeToHDMI: Any extra delay (DelayMs) added to the output, will be relative to the
detected delay on the HDMI output. The actual delay is HDMI-delay + DelayMs. The
Audio Output Connectors Line [n] DelayMs status reports the actual delay.
36
API Reference Guide
xStatus Appendices
n Delay Mode: Mode
Copyright © 2017 Cisco Systems, Inc. All rights reserved.