Xcommand Usermanagement Remotesupportuser Getstate; Xcommand Usermanagement User Passphrase Change; Xcommand Usermanagement User Passphrase Set - Cisco TelePresence SX10 Reference Manual

Cisco TelePresence SX10

Introduction

xCommand UserManagement RemoteSupportUser GetState

Retrieves the state of the generated remote support user, if one exists.
Requires user role: ADMIN
USAGE:
xCommand UserManagement RemoteSupportUser GetState

xCommand UserManagement User Passphrase Change

Change the passphrase for the user you logged in as. If you are logged in as the administrator,
this will change the administrator passphrase.
Requires user role: ADMIN, AUDIT, INTEGRATOR, ROOMCONTROL, USER
USAGE:
xCommand UserManagement User Passphrase Change NewPassphrase: "NewPassphrase"
OldPassphrase: "OldPassphrase"
where
: String (0, 255)
NewPassphrase
: String (0, 255)
OldPassphrase
Cisco TelePresence SX10 API Reference Guide CE9.1, JUNE 2017.
D15333.07
About the API xConfiguration xCommand xCommand

xCommand UserManagement User Passphrase Set

Set a user passphrase for the specified user. You must be logged in as an administrator to set a
user passphrase.
Requires user role: ADMIN
USAGE:
xCommand UserManagement User Passphrase Set NewPassphrase: "NewPassphrase"
Username: "Username" YourPassphrase: "YourPassphrase"
where
: String (0, 255)
NewPassphrase
: String (0, 127)
Username
: String (0, 255)
YourPassphrase
124
API Reference Guide
xStatus Appendices
Copyright © 2017 Cisco Systems, Inc. All rights reserved.