Table of Contents
Advertisement
4.6.1 Chart Descriptions (continued)
K)
Message Window is described below.
Item:
Function
a
Device Measurement Mode/Type
b
CH A & CH B Combined input reading (A-B F or A-B T mode)
c
CH A input reading value
d
CH B input reading value
e
Your own-defined Name of Experiment/Measurement Task
f
Unit of Input Value (definable)
g
= 3 bits: 1st bit: the transmit active bit
h
SP1 (setpoint 1) value (A Batch value if Batch mode used)
i
SP2 (setpoint 2) value (B Batch value if Batch mode used)
j
Batch A Number (Number of A Batches)
k
Batch B Number (Number of B Batches)
l
A-B mode sign. (+, -, x and /)
m
User-definable time/date stamp of Input Reading.
This time/date stamp will reset to default if the device's
power was recycled.
These Message Item Windows will restart with new data after 10 lines of data.
L1)
Click this button to restart or to revert the measurement to specific number or a
device condition to a specific state such as Zero or SetPoint.
L2)
Click this button to reset Alarm SetPoint Latched condition of Channel A.
L3)
Click this button to reset Alarm SetPoint Latched condition of Channel B.
In order to be able to using those above Reset Functions' buttons, users will be
prompted at Login page for password once.
Table 4.1 Message Item Window Description
Message: Content Description:
2nd bit: the SP1 active bit
3rd bit: the SP2 active bit
21
Advertisement
Table of Contents
