Parts Of Iserver Unit; Figure 2.6 Parts Of Iserver Unit; Table 2.1 Parts Of Iserver Unit - Omega iServer Microserver User Manual

2.3 Parts of the iServer Unit
1 2 3 4 5 6 7 8
ETHERNET RJ45 interface for 10BASE-T connection.
RESET Button: Used for power reseting the iServer.
I/O Connections for Channel A and Channel B, Refer to Section 2.4.
ACTIVITY LED (Red) Blinking: Indicates network activities (receiving or sending packets).
NET LINK LED (Green) Solid: Indicates good network link.
DIAG LED (Yellow and Green) Diagnostics: at boot-up they turn on for 2 seconds, then
turn off; DHCP: if DHCP is enabled, they blink and stay solid periodically
POWER LED (Green) Solid: Indicates Power-ON (for -W version only).
DC Power Supply Section:
+ Plus power supply wire connection (inside the plug for -W version).
- Minus power supply wire connection (outside the plug for -W version).
RJ45 interface
Reset Button
dc Power Input
Power LED
Figure 2.6 Parts of the iServer Unit

Table 2.1 Parts of iServer Unit

1 2 3 4
LEDs
5 6 7 8
Mounting
Tabs
7
I/O Connectors
Channel A
Channel B
RJ45 interface
Reset Button
LEDs
dc Power Input