Enabling Cfs To Distribute Fc Domain Configurations - Cisco Nexus 7000 Series Configuration Manual

Configuring CFS
Step 4
This example shows how to enable CFS to distribute DPVM configurations:
switch(config)# dpvm distribute
switch(config)# show dpvm status
Distribution is enabled.
switch(config)# copy running-config startup-config
[########################################] 100%

Enabling CFS to Distribute FC Domain Configurations

You can enable CFS to distribute Fibre Channel (FC) domain configurations in order to synchronize the
configuration across the fabric from the console of a single Cisco NX-OS device and to ensure consistency
in the allowed domain ID lists on all devices in the VSAN.
Before You Begin
Make sure that you are in the storage VDC. To change to the storage VDC, use the switchto vdc fcoe command.
Procedure
Step 1
Step 2
Step 3
Step 4
This example shows how to enable CFS to distribute FC domain configurations:
switch(config)# fcdomain distribute
switch(config)# show fcdomain status
fcdomain distribution is enabled
switch(config)# copy running-config startup-config
[########################################] 100%
Command or Action
switch(config)# copy running-config
startup config
Command or Action
switch# configure terminal
switch(config)# fcdomain distribute
switch(config)# show application-name
status
switch(config)# copy running-config
startup config
Cisco Nexus 7000 Series NX-OS System Management Configuration Guide
Enabling CFS Distribution for Applications
Purpose
(Optional)
Saves the change persistently through reboots and
restarts by copying the running configuration to the
startup configuration.
Purpose
Enters global configuration mode.
Enables CFS to distribute FC domain configuration
updates.
(Optional)
For the specified application, displays the CFS
distribution status.
(Optional)
Saves the change persistently through reboots and
restarts by copying the running configuration to the
startup configuration.
27