Cisco Nexus 7000 Series Configuration Manual page 123

Configuring System Message Logging
Step 3
Step 4
Step 5
Command or Action
[no] logging console [severity-level]
Example:
switch(config)# logging console
3
show logging console
Example:
switch(config)# show logging
console
[no] logging monitor [severity-level]
Example:
switch(config)# logging monitor
3
Cisco Nexus 7000 Series NX-OS System Management Configuration Guide
Configuring System Message Logging to Terminal Sessions
Purpose
Configures the device to log messages to the console session
based on a specified severity level or higher. A lower
number indicates a higher severity level. Severity levels
range from 0 to 7:
• 0 – emergency
• 1 – alert
• 2 – critical
• 3 – error
• 4 – warning
• 5 – notification
• 6 – informational
• 7 – debugging
If the severity level is not specified, the default of 2 is used.
The no option disables the device's ability to log messages
to the console.
(Optional)
Displays the console logging configuration.
Enables the device to log messages to the monitor based on
a specified severity level or higher. A lower number
indicates a higher severity level. Severity levels range from
0 to 7:
• 0 – emergency
• 1 – alert
• 2 – critical
• 3 – error
• 4 – warning
• 5 – notification
• 6 – informational
• 7 – debugging
The configuration applies to Telnet and SSH sessions.
If the severity level is not specified, the default of 2 is used.
The no option disables the device's ability to log messages
to the Telnet and SSH sessions.
95