Configuration Examples For Online Diagnostics - Cisco Nexus 7000 Series Configuration Manual

Configuration Examples for Online Diagnostics

Command
show diagnostic eem [action [description] | policy module {module
number | all}]
show diagnostic events [error | info]
show diagnostic ondemand setting
show diagnostic result module slot [test [test-name | all]] [detail]
show diagnostic simulation module slot
show diagnostic status module slot
show event manager events action-log event-type [gold |
gold_sup_failure | gold_fabric_failure | gold_module_failure |
gold_port_failure]
show hardware capacity [eobc | forwarding | interface | module |
power]
show module
Configuration Examples for Online Diagnostics
This example shows how to start all on-demand tests on module 6:
diagnostic start module 6 test all
This example shows how to activate test 2 and set the test interval on module 6:
configure terminal
diagnostic monitor module 6 test 2
Cisco Nexus 7000 Series NX-OS System Management Configuration Guide
236
Configuring Online Diagnostics
Purpose
Displays the Embedded Event
Manager (EEM) action level and
the EEM policies configured for
the level.
Displays diagnostic events by error
and information event type.
Displays information about
on-demand diagnostics.
Displays information about the
results of a diagnostic.
Displays information about a
simulated diagnostic.
Displays the test status for all tests
on a module.
Displays the recovery action
history for the specified failure,
including the number of
switchovers, reloads, and
poweroffs, as well as timestamp,
failure reason, module-id, port list,
test name, testing type, and
severity. This data is maintained
across ungraceful reloads.
Displays information about the
hardware capabilities and current
hardware utilization by the system.
Displays module information
including the online diagnostic test
status.