Cisco Nexus 7000 Series Configuration Manual page 251

Configuring Online Diagnostics
Test Name
FIPS
BootupPortLoopback
Table 26: Bootup Diagnostic Tests for Supervisors
Test Name
USB
CryptoDevice
ManagementPortLoopback
Description Supported Modules
Disruptive test; run only N7K-M148GS-11
when FIPS is enabled on
N7K-M148GS-11L
the system. An internal
N7K-M108X2-12L
test that runs during
module bootup to validate
N7K-M132XP-12
the security device on the
N7K-M132XP-12L
module.
All M2 Modules
Disruptive test, not an N7K-M148GS-11
on-demand test. A
N7K-M148GS-11L
PortLoopback test that
N7K-M108X2-12L
runs only during module
bootup.
N7K-M132XP-12
N7K-M132XP-12L
All M2 Modules
All F1 Modules
All F2 Modules
All F2e Modules
N77-M348XP-23L
N77-M324FQ-25L
Description Supported Modules
Nondisruptive test. Sup1, Sup2, and Sup2E
Checks the USB
controller initialization on
a module.
Nondisruptive test. Sup1
Checks the Cisco Trusted
Security (CTS) device
initialization on a module.
Disruptive test, not an Sup1, Sup2, and Sup2E
on-demand test. Tests
loop back on the
management port of a
module.
Cisco Nexus 7000 Series NX-OS System Management Configuration Guide
Bootup Diagnostics
Unsupported Modules
N7K-M148GT-11
N7K-M148GT-11L
All F1 Modules
All F2 Modules
N7K-F248XT-25E
All F3 Modules
All M3 Modules
N7K-M148GT-11
N7K-M148GT-11L
All F3 Modules
Unsupported Modules
—
Sup2 and Sup2E
—
223