Configuring Ntp; Finding Feature Information; About Ntp - Cisco Nexus 7000 Series Configuration Manual

Configuring NTP

This chapter describes how to configure the Network Time Protocol (NTP) on Cisco NX-OS devices.
This chapter includes the following sections:
•
•
•
•
•
•
•
•
•
•
•

Finding Feature Information

Your software release might not support all the features documented in this module. For the latest caveats
and feature information, see the Bug Search Tool at
for your software release. To find information about the features documented in this module, and to see a list
of the releases in which each feature is supported, see the "New and Changed Information" chapter or the
Feature History table in this chapter.

About NTP

The Network Time Protocol (NTP) synchronizes the time of day among a set of distributed time servers and
clients so that you can correlate events when you receive system logs and other time-specific events from
Finding Feature Information, page 45
About NTP, page 45
Licensing Requirements for NTP, page 48
Prerequisites for NTP, page 48
Guidelines and Limitations for NTP, page 48
Default Settings for NTP, page 50
Configuring NTP, page 50
Verifying the NTP Configuration, page 64
Configuration Examples for NTP, page 65
Additional References, page 66
Feature History for NTP, page 66
C H A P T E R
https://tools.cisco.com/bugsearch/
Cisco Nexus 7000 Series NX-OS System Management Configuration Guide
4
and the release notes
45