Configuring CDP
This chapter describes how to configure the Cisco Discovery Protocol (CDP) on Cisco NX-OS devices.
This chapter includes the following sections:
•
•
•
•
•
•
•
•
•
•
•
Finding Feature Information
Your software release might not support all the features documented in this module. For the latest caveats
and feature information, see the Bug Search Tool at
for your software release. To find information about the features documented in this module, and to see a list
of the releases in which each feature is supported, see the "New and Changed Information" chapter or the
Feature History table in this chapter.
About CDP
The Cisco Discovery Protocol (CDP) is a media-independent and protocol-independent protocol that runs on
all Cisco-manufactured equipment including routers, bridges, access and communication servers, and switches.
Finding Feature Information, page 83
About CDP, page 83
Licensing Requirements for CDP, page 85
Prerequisites for CDP, page 85
Guidelines and Limitations for CDP, page 85
Default Settings for CDP, page 86
Configuring CDP, page 86
Verifying the CDP Configuration, page 89
Configuration Example for CDP, page 89
Additional References, page 90
Feature History for CDP, page 90
C H A P T E R
https://tools.cisco.com/bugsearch/
Cisco Nexus 7000 Series NX-OS System Management Configuration Guide
6
and the release notes
83