Verifying The Cfs Configuration - Cisco Nexus 7000 Series Configuration Manual

Configuring CFS
Procedure
Step 1
Step 2
Step 3
Step 4
switch# configure terminal
switch(config)# no cfs distribute
This will prevent CFS from distributing the configuration to other switches.
Are you sure? (y/n) [n] y
switch(config)# show cfs status
Distribution : Disabled
Distribution over IP : Disabled
IPv4 multicast address : 239.255.70.83
Distribution over Ethernet : Disabled
switch(config)# copy running-config startup-config

Verifying the CFS Configuration

Command
show application-name session status
show application-name status
show cfs application
show cfs application name application-name
show cfs internal
show cfs lock
Command or Action
switch# configure terminal
switch(config)# no cfs distribute
switch(config)# show cfs status
switch(config)# copy running-config
startup config
Cisco Nexus 7000 Series NX-OS System Management Configuration Guide
Verifying the CFS Configuration
Purpose
Enters global configuration mode.
Globally disables CFS distribution for all applications
on the device.
(Optional)
Displays the global CFS distribution status for the
device.
(Optional)
Saves the change persistently through reboots and
restarts by copying the running configuration to the
startup configuration.
Purpose
Displays the configuration session status, including
the last action, the result, and the reason if there was
a failure.
For the specified application, displays the CFS
distribution status.
Displays the applications that are currently CFS
enabled.
Displays the details for a particular application,
including the enabled or disabled state, timeout as
registered with CFS, merge capability if registered
with CFS for merge support, distribution scope, and
distribution region.
Displays information internal to CFS including
memory statistics, event history, and so on.
Displays all active locks.
41