Configuring The Scheduler; Enabling Or Disabling The Scheduler; Defining The Scheduler Log File Size - Cisco Nexus 7000 Series Configuration Manual

Configuring the Scheduler

Parameters
Scheduler state
Log file size
Configuring the Scheduler

Enabling or Disabling the Scheduler

You can enable the scheduler feature so that you can configure and schedule jobs, or you can disable the
scheduler feature after it has been enabled.
Procedure
Step 1
Step 2
Step 3
Step 4

Defining the Scheduler Log File Size

You can configure the log file size for capturing jobs, schedules, and job output.
Procedure
Step 1
Step 2
Cisco Nexus 7000 Series NX-OS System Management Configuration Guide
166
Command or Action
switch# configure terminal
switch(config)# [no] feature scheduler
switch(config)# show scheduler config
switch(config)# copy running-config
startup-config
Command or Action
switch# configure terminal
switch(config)# scheduler logfile size
value
Default
Disabled
16 KB
Purpose
Enters global configuration mode.
Enables or disables the scheduler.
(Optional)
Displays the scheduler configuration.
(Optional)
Copies the running configuration to the startup
configuration.
Purpose
Enters global configuration mode.
Defines the scheduler log file size in kilobytes. The range
is from 16 to 1024. The default is 16.
Note If the size of the job output is greater than the
size of the log file, then the output is truncated.
Configuring the Scheduler