Configuring SPAN
Configuration Example for Exception SPAN
This example shows how to configure a SPAN session to span exception packets:
switch# configure terminal
switch(config)# monitor session 3
switch(config-monitor)# source exception all
switch(config-monitor)# destination interface ethernet 2/5, ethernet 3/7
switch(config-monitor)# no shut
switch(config)# show monitor session 3
Related Documents
Table 33: Related Documents
Related Topic
Cisco Network Analysis Module (NAM)
VDCs
Fabric Extender
SPAN commands: complete command syntax,
command modes, command history, defaults, usage
guidelines, and examples
Feature History for SPAN
The table below summarizes the new and changed features for this document and shows the releases in which
each feature is supported. Your software release might not support all the features in this document. For the
latest caveats and feature information, see the Bug Search Tool at
release notes for your software release.
Table 34: Feature History for SPAN
Feature Name
SPAN
SPAN
Document Title
Cisco Network Analysis Module (NAM) for Nexus
7000 Quick Start Guide
Cisco Nexus 7000 Series NX-OS Virtual Device
Context Configuration Guide
Cisco Nexus 2000 Series Fabric Extender Software
Configuration Guide
Cisco Nexus 7000 Series NX-OS System Management
Command Reference
Releases
7.3(0)DX(1)
7.3(0)D1(1)
Cisco Nexus 7000 Series NX-OS System Management Configuration Guide
Configuration Example for Exception SPAN
https://tools.cisco.com/bugsearch/
Feature Information
Added support for M3 Series modules.
Added support for 4K VLANs per
SPAN Session.
and the
325