Cisco Nexus 7000 Series Configuration Manual page 224

Enabling SNMP Notifications
Command
snmp-server enable traps aaa [server-state-change]
snmp-server enable traps bgp [cbgp2]
snmp-server enable traps bridge [newroot] [topologychange]
snmp-server enable traps callhome [event-notify] [smtp-send-fail]
Cisco Nexus 7000 Series NX-OS System Management Configuration Guide
196
Configuring SNMP
Purpose
Enables the AAA SNMP
notifications. Optionally, enables
the following specific notifications:
• server-state-change—Enables
AAA server state-change
notifications.
Enables CISCO-BGP4-MIB SNMP
notifications. Optionally, enables
the following specific notifications:
• bgp cbgp2—Enables
CISCO-BGP4-MIBv2 SNMP
notifications.
Enables STP bridge SNMP
notifications. Optionally, enables
the following specific notifications:
• newroot—Enables STP new
root bridge notifications.
• topologychange—Enables
STP bridge topology-change
notifications.
Enables Call Home notifications.
Optionally, enables the following
specific notifications:
• event-notify—Enables Call
Home external event
notifications.
• smtp-send-fail—Enables
Simple Mail Transfer
Protocol (SMTP) message
send fail notifications.