Enabling Cfs Distribution For Ntp - Cisco Nexus 3548 Configuration Manual

Configuring NTP
Procedure
Step 1
Step 2
Step 3
Step 4
This example shows how to enable NTP logging in order to generate system logs with significant NTP events:
switch# config t
switch(config)# ntp logging
switch(config)# copy running-config startup-config
[########################################] 100%
switch(config)#

Enabling CFS Distribution for NTP

You can enable CFS distribution for NTP in order to distribute the NTP configuration to other CFS-enabled
devices.
Before You Begin
Make sure that you have enabled CFS distribution for the device.
Procedure
Step 1
Step 2
Step 3
Step 4
Command or Action
switch# configure terminal
switch(config)# [no] ntp logging
switch(config)# show ntp
logging-status
switch(config)# copy running-config
startup-config
Command or Action
switch# configure terminal
switch(config)# [no] ntp distribute
switch(config)# show ntp status
switch(config)# copy running-config
startup-config
Cisco Nexus 3548 Switch NX-OS System Management Configuration Guide, Release 6.x
Enabling CFS Distribution for NTP
Purpose
Enters global configuration mode.
Enables or disables system logs to be generated with
significant NTP events. NTP logging is disabled by
default.
(Optional)
Displays the NTP logging configuration status.
(Optional)
Saves the change persistently through reboots and
restarts by copying the running configuration to the
startup configuration.
Purpose
Enters global configuration mode.
Enables or disables the device to receive NTP
configuration updates that are distributed through CFS.
(Optional)
Displays the NTP CFS distribution status.
(Optional)
Saves the change persistently through reboots and
restarts by copying the running configuration to the
startup configuration.
61