Enabling Cfs To Distribute Radius Configurations; Enabling Cfs To Distribute Rscn Configurations - Cisco Nexus 7000 Series Configuration Manual

Configuring CFS

Enabling CFS to Distribute RADIUS Configurations

You can enable CFS to distribute RADIUS configurations to all Cisco NX-OS devices in the network.
Procedure
Step 1
Step 2
Step 3
Step 4
switch# configure terminal
switch(config)# radius distribute
switch(config)# show radius status
Distribution : Enabled
switch(config)# copy running-config startup-config

Enabling CFS to Distribute RSCN Configurations

You can enable CFS to distribute registered state change notification (RSCN) configurations to all Cisco
NX-OS devices in the fabric.
Before You Begin
Make sure that you are in the storage VDC. To change to the storage VDC, use the switchto vdc fcoe command.
Procedure
Step 1
Step 2
Step 3
Command or Action
switch# configure terminal
switch(config)# radius distribute
switch(config)# show application-name
status
switch(config)# copy running-config
startup config
Command or Action
switch# configure terminal
switch(config)# rscn distribute
switch(config)# show cfs application
Cisco Nexus 7000 Series NX-OS System Management Configuration Guide
Enabling CFS Distribution for Applications
Purpose
Enters global configuration mode.
Enables CFS to distribute RADIUS configuration
updates.
(Optional)
For the specified application, displays the CFS
distribution status.
(Optional)
Saves the change persistently through reboots and
restarts by copying the running configuration to the
startup configuration.
Purpose
Enters global configuration mode.
Enables CFS to distribute RSCN configuration
updates.
(Optional)
Displays the CFS distribution status.
31