Xcommand Video Matrix Swap; Xcommand Video Matrix Unassign; Xcommand Video Presentationpip Set; Xcommand Video Presentationview Set - Cisco TelePresence SX20 Codec Reference Manual

Cisco TelePresence SX20 Codec

Introduction

xCommand Video Matrix Swap

Swap the content defined with xCommand Video Matrix Assign between two outputs.
xCommand Video Matrix commands are a smart overlay to the xCommand Video Layout
commands to make it easy to do simple video compositions.
Requires user role: ADMIN, USER
USAGE:
xCommand Video Matrix Swap OutputA:
where
OutputA: Integer (1..2)
The output you are swapping from.
OutputB: Integer (1..2)
The output you are swapping to.

xCommand Video Matrix Unassign

Remove a source from an output. Just as with xCommand Video Matrix Assign the layout
engine will recompose the remaining sources automatically.
xCommand Video Matrix commands are a smart overlay to the xCommand Video Layout
commands to make it easy to do simple video compositions.
Requires user role: ADMIN, USER
USAGE:
xCommand Video Matrix Unassign Output:
where
Output: Integer (1..2)
Choose the output you wish to remove the source from.
SourceId: Integer (1..3)
The identifier (ID) of the input source. Input Source [n] has ID n. Run the following API
command to find the ID: xStatus Video Input Source.
SX20 Codec API Reference Guide CE8.1, APRIL 2016.
D15316.03
About the API xConfiguration
OutputA OutputB: OutputB
Output SourceId: SourceId
xCommand xCommand

xCommand Video PresentationPIP Set

Sets position for the presentation PiP (picture in picture).
Requires user role: ADMIN, USER
USAGE:
xCommand Video PresentationPIP Set Position:
where
Position: CenterLeft/CenterRight/LowerLeft/LowerRight/UpperCenter/UpperLeft/UpperRight
Select one of the predefined positions.

xCommand Video PresentationView Set

Set the presentation view mode
Requires user role: ADMIN, USER
USAGE:
xCommand Video PresentationView Set View:
where
View: Default/Maximized/Minimized
Select Default when you want the presentation to be viewed with the default settings
for the codec. Select Maximized when you want the presentation to be displayed in full
screen. Select
Minimized when you want the presentation to be displayed in a small picture on screen.
127
API Reference Guide
xStatus Appendices
Position
View
Copyright © 2016 Cisco Systems, Inc. All rights reserved.