Xcommand Audio Volume Set; Xcommand Audio Volume Settodefault; Xcommand Audio Volume Unmute; Bookings Commands - Cisco TelePresence SX20 Codec Reference Manual

Cisco TelePresence SX20 Codec

Introduction

xCommand Audio Volume Set

Set the volume on the endpoint to a specified level.
Requires user role: ADMIN, USER
USAGE:
xCommand Audio Volume Set Level:
where
Level: Integer (0..100)
Select gain level. The default level 70 equals 0dB gain. Level 100 equals 15db gain.

xCommand Audio Volume SetToDefault

Set the current volume level as the default for the endpoint.
Requires user role: ADMIN, USER
USAGE:
xCommand Audio Volume SetToDefault

xCommand Audio Volume Unmute

Set the volume on the endpoint back on after muting.
Requires user role: ADMIN, USER
USAGE:
xCommand Audio Volume Unmute
SX20 Codec API Reference Guide CE8.1, APRIL 2016.
D15316.03
About the API xConfiguration
Level
xCommand xCommand

Bookings commands

xCommand Bookings Clear

Clear the current stored list of bookings.
Requires user role: ADMIN, USER
USAGE:
xCommand Bookings Clear

xCommand Bookings Get

Get the booking information for a specific ID.
Requires user role: ADMIN, USER
USAGE:
xCommand Bookings Get Id: "Id"
where
Id: String (0, 128)
The booking ID of a call or conference.
94
API Reference Guide
xStatus Appendices
Copyright © 2016 Cisco Systems, Inc. All rights reserved.