Userinterface Configuration; Xconfiguration Userinterface Contactinfo Type; Xconfiguration Userinterface Keytones Mode; Xconfiguration Userinterface Language - Cisco TelePresence SX20 Codec Reference Manual

Cisco TelePresence SX20 Codec

Introduction

UserInterface configuration

xConfiguration UserInterface ContactInfo Type

Choose which type of contact information to show in the status field in the upper left corner of
the display and Touch controller.
Requires user role: ADMIN
Default value: Auto
USAGE:
xConfiguration UserInterface ContactInfo Type:
where
Type
: Auto/None/IPv4/IPv6/H323Id/H320Number/E164Alias/SipUri/SystemName/
DisplayName
Auto: Show the address which another system should dial to reach this video system.
The address depends on the default call protocol and system registration.
None: Do not show any contact information.
IPv4: Show the system's IPv4 address.
IPv6: Show the system's IPv6 address.
H323Id: Show the system's H.323 ID (refer to the H323 H323Alias ID setting).
H320Number: Show the system's H.320 number as contact information (only applicable
if connected to Cisco TelePresence ISDN Link).
E164Alias: Show the system's H.323 E164 Alias as contact information (refer to the
H323 H323Alias E164 setting).
SipUri: Show the system's SIP URI (refer to the SIP URI setting).
SystemName: Show the system's name (refer to the SystemUnit Name setting).
DisplayName: Show the system's display name (refer to the SIP DisplayName setting).
SX20 Codec API Reference Guide CE8.1, APRIL 2016.
D15316.03
About the API xConfiguration xConfiguration
Type
xCommand

xConfiguration UserInterface KeyTones Mode

You can configure the system to make a keyboard click sound effect (key tone) when pressing a
key on the remote control, or when typing text or numbers on the Touch controller.
Requires user role: ADMIN, USER
Default value: On
USAGE:
xConfiguration UserInterface KeyTones Mode:
where
Mode
: Off/On
Off: There is no key tone sound effect.
On: The key tone sound effect is turned on.

xConfiguration UserInterface Language

Select the language to be used in menus and messages on the screen and Touch controller.
The default language is English.
Requires user role: ADMIN, USER
Default value: English
USAGE:
xConfiguration UserInterface Language:
where
Language
: English/ChineseSimplified/ChineseTraditional/Catalan/Czech/Danish/
Dutch/Finnish/French/German/Hungarian/Italian/Japanese/Korean/Norwegian/Polish/
PortugueseBrazilian/Russian/Spanish/Swedish/Turkish/Arabic/Hebrew
Select a language from the list.
80
API Reference Guide
xStatus Appendices
Mode
Language
Copyright © 2016 Cisco Systems, Inc. All rights reserved.