Xconfiguration Sip Listenport; Xconfiguration Sip Proxy [1..4] Address; Xconfiguration Sip Turn Server; Xconfiguration Sip Turn Username - Cisco TelePresence MX700 Reference Manual

Cisco TelePresence MX700 and MX800

Introduction

xConfiguration SIP ListenPort

Turn on or off the listening for incoming connections on the SIP TCP/UDP ports. If turned off,
the endpoint will only be reachable through the SIP registrar (CUCM or VCS). It is recom-
mended to leave this setting at its default value.
Requires user role: ADMIN
Default value: On
USAGE:
xConfiguration SIP ListenPort: ListenPort
where
ListenPort
: Off/On
Off: Listening for incoming connections on the SIP TCP/UDP ports is turned off.
On: Listening for incoming connections on the SIP TCP/UDP ports is turned on.

xConfiguration SIP Proxy [1..4] Address

The Proxy Address is the manually configured address for the outbound proxy. It is possible to
use a fully qualified domain name, or an IP address. The default port is 5060 for TCP and UDP
but another one can be provided.
Requires user role: ADMIN
Default value: ""
USAGE:
xConfiguration SIP Proxy n Address: "Address"
where
n
: Index that identifies the proxy (maximum 4 proxys can be defined). Range: 1..4
Address
: String (0, 255)
A valid IPv4 address, IPv6 address or DNS name.
Cisco TelePresence MX700 and MX800 API Reference Guide CE8.0, FEBRUARY 2016.
D15335.02
About the API xConfiguration xConfiguration xCommand

xConfiguration SIP Turn Server

Define the address of the TURN (Traversal Using Relay NAT) server. It is used as a media relay
fallback and it is also used to discover the endpoint's own public IP address.
Requires user role: ADMIN
Default value: ""
USAGE:
xConfiguration SIP Turn Server: "Server"
where
Server
: String (0, 255)
The preferred format is DNS SRV record (e.g. _turn._udp.<domain>), or it can be a valid
IPv4 or IPv6 address.

xConfiguration SIP Turn UserName

Define the user name needed for accessing the TURN server.
Requires user role: ADMIN
Default value: ""
USAGE:
xConfiguration SIP Turn UserName: "UserName"
where
UserName
: String (0, 128)
A valid user name.

xConfiguration SIP Turn Password

Define the password needed for accessing the TURN server.
Requires user role: ADMIN
Default value: ""
USAGE:
xConfiguration SIP Turn Password: "Password"
where
Password
: String (0, 128)
A valid password.
75
API Reference Guide
xStatus Appendices
Copyright © 2016 Cisco Systems, Inc. All rights reserved.