O i l Filter F e e d P i p e R e p l a c e m e n t
1. Remove the filter (see page 8-7).
2. Remove the oil filter feed pipe.
3. Install t w o 20 x 1.5 m m nuts (A) onto the new oil
filter feed pipe, and hold one nut w i t h a w r e n c h ,
then tighten the other nut.
A
4. Tighten the oil filter feed pipe to 49 N-m (5.0 kgf-m,
36 Ibf-ft), then remove the nuts f r o m the oil filter
feed pipe.
5. Install the filter (see page 8-7).
Oil J e t R e p l a c e m e n t
1. Remove the crankshaft f r o m the engine block
(see page 7-13).
2. Remove the oil jet bolt (A), then remove and
discard oil jet (B).
3. Carefully install the new oil jet and tighten the oil
jet bolt.
4. Install the crankshaft (see page 7-24).
8-9