6. A p p l y liquid gasket, P/N 08717-004, 08718-0001,
08718-0003, or 08718-0009, on the rocker shaft
holder m a t i n g areas (A).
NOTE: Do not install the parts if 4 minutes or more
have elapsed since applying the liquid gasket.
Instead, reapply liquid gasket after r e m o v i n g the
old residue.
7. Set the spark plug seals (A) on the spark plug tubes,
and install the rear cylinder head cover (B).
8. Visually check the spark plug seals for damage.
9. Inspect the cover washers (C). Replace any washer
that is damaged or deteriorated.
10. Tighten the bolts in t w o or three steps. In the final
step tighten all bolts, in sequence, 12 N-m
(1.2 kgf-m, 8.7 I b f f t ) .
®
®
®.
©
©
11. Tighten the three bolts (A) securing the harness
holder.
6 x 1.0 m m
12 N-m
(1.2 kgf-m, 8.7 Ibfft)
12. Install the breather hose (B) and g r o u n d cable (C).
(cont'd)
6-35