Signals - ABB RED615 Technical Manual

Section 6
Supervision functions
6.5.6
6.5.7
Table 518: MDSOPT Non group settings
Parameter
Operation
Warning value
Alarm value
Initial value
Operating time hour
Operating time mode
6.5.8
602

Signals

Table 516: MDSOPT Input signals
Name
BLOCK
POS_ACTIVE
RESET
Table 517: MDSOPT Output signals
Name
ALARM
WARNING
Settings
Values (Range) Unit
1=on
5=off
0...299999 h
0...299999 h
0...299999 h
0...23 h
1=Immediate
2=Timed Warn
3=Timed Warn Alm
Monitored data
Table 519: MDSOPT Monitored data
Name
MDSOPT
OPR_TIME
Type Default Description
BOOLEAN 0=False Block input status
BOOLEAN 0=False When active indicates the equipment is running
BOOLEAN 0=False Resets the accumulated operation time to initial
value
Type Description
BOOLEAN Alarm accumulated operation time exceeds Alarm
value
BOOLEAN Warning accumulated operation time exceeds
Warning value
Step Default
1=on
1 8000
1 10000
1 0
1 0
1=Immediate
Type Values (Range)
Enum 1=on
2=blocked
3=test
4=test/blocked
5=off
INT32 0...299999
1YHT530004D05 D
Description
Operation Off / On
Warning value for operation time
supervision
Alarm value for operation time supervision
Initial value for operation time supervision
Time of day when alarm and warning will
occur
Operating time mode for warning and
alarm
Unit Description
Status
h Total operation time in
hours
Technical Manual
615 series