Table 13-6 Cisco Ons 15454 Client/Client Card Combinations For Provisionable Patchcords; Table 13-7 Cisco Ons 15454 Trunk/Trunk Card Combinations For Provisionable Patchcords - Cisco ONS 15454 Reference Manual

Chapter 13 Management Network Connectivity
If the OCSM card is installed in Slot 8, provisionable patchcords from OC-N ports to the following cards
Note
are not supported on the same node: MXP_2.5G_10G, TXP_MR_10G, TXP(P)_MR_2.5G,
MXP_2.5G_10E, TXP_MR_10E, 32MUX-O, 32DMX-O, 32WSS, and 32DMX.
Table 13-6
Table 13-6
Client Cards
MXP_2.5G_10G/
TXP_MR_10G
TXP(P)_MR_2.5G
MXP_2.5G_10E/
TXP_MR_10E
Table 13-7
Table 13-7
Trunk Cards
MXP_2.5G_10G/
TXP_MR_10G
TXP(P)_MR_2.5G
MXP_2.5G_10E/
TXP_MR_10E
Optical ports have the following requirements when used in a provisionable patchcord:
An optical port connected to a TXP/MXP port, add/drop multiplexer port, or
•
multiplexer/demultiplexer port requires a Section DCC/Line DCC (SDCC/LDCC) termination.
If the optical port is the protection port in a 1+1 group, the working port must have an SDCC/LDCC
•
termination provisioned.
If the remote end of a patchcord is Y-cable protected or is an add/drop multiplexer or
•
multiplexer/demultiplexer port, an optical port requires two patchcords.
TXP and MXP ports have the following requirements when used in a provisionable patchcord:
Two patchcords are required when a TXP/MXP port is connected to an add/drop multiplexer or
•
multiplexer/demultiplexer port. CTC automatically prompts the user to set up the second patchcord.
• If a patchcord is on a client port in a regenerator group, the other end of the patchcord must be on
the same node and on a port within the same regenerator group.
A patchcord is allowed on a client port only if the card is in transparent mode.
•
DWDM cards support provisionable patchcords only on optical channel ports. Each DWDM optical
channel port can have only one provisionable patchcord.
OL-9217-01
lists the supported card combinations for client-to-client ports in a patchcord.
Cisco ONS 15454 Client/Client Card Combinations for Provisionable Patchcords
MXP_2.5G_10G/
TXP_MR_10G
Yes
—
Yes
lists the supported card combinations for trunk-to-trunk ports in a patchcord.
Cisco ONS 15454 Trunk/Trunk Card Combinations for Provisionable Patchcords
MXP_2.5G_10G/
TXP_MR_10G
Yes
—
Yes
TXP(P)_MR_2.5G MXP_2.5G_10E/
TXP_MR_10E
— Yes
Yes —
— Yes
MXP_2.5G_10E/
TXP(P)_MR_2.5G TXP_MR_10E
— Yes
Yes —
— Yes
Cisco ONS 15454 Reference Manual, R7.0.1
13.3 13.3 Provisionable Patchcords
13-25