Performance Monitoring For Optical Cards - Cisco ONS 15454 Reference Manual

15.7 15.7 Performance Monitoring for Optical Cards

15.7 Performance Monitoring for Optical Cards
This section lists PM parameters for ONS 15454 optical cards, including the OC-3, OC-12, OC-48, and
OC-192 cards.
Figure 15-20
PTE
Note The XX in
given prefix and/or suffix.
Figure 15-21
IR 4 SH 1310 and OC3 IR SH 1310-8 cards.
Figure 15-21
ONS 15454
For PM locations relating to protection switch counts, see the Telcordia GR-253-CORE document.
Note
Cisco ONS 15454 Reference Manual, R7.0.1
15-42
Figure 15-20 shows the signal types that support near-end and far-end PMs.
Monitored Signal Types for the OC-3 Cards
ONS 15454
OC-3 Signal
OC-3
STS Path (STS XX-P) PMs Near and Far End Supported
Figure 15-20 represents all PMs listed in
shows where overhead bytes detected on the ASICs produce PM parameters for the OC3
PM Read Points on the OC-3 Cards
Pointer Processors
CV-S
ES-S
SES-S
SEFS-S
CV-L
ES-L
SES-L
UAS-L
FC-L
PPJC-Pdet
NPJC-Pdet
PPJC-Pgen
NPJC-Pgen
PMs read on PMC
Fiber
OC48
Table
OC-3 Card
BTC
ASIC
STS CV-P
STS ES-P
STS FC-P
STS SES-P
STS UAS-P
STS CV-PFE
STS ES-PFE
STS FC-PFE
STS SES-PFE
STS UAS-PFE
PMs read on BTC ASIC
Chapter 15 Performance Monitoring
ONS 15454
OC-3 Signal
OC48 OC-3
15-22, Table 15-23, and Table 15-24
XC Card(s)
Path
Level
PTE
with the
OC-N
OL-9217-01