Table 1-34 Ons 15454 Software And Hardware Compatibility-Xc10G And Xc-Vxc-10G Configurations - Cisco ONS 15454 Reference Manual

Hide thumbs Also See for ONS 15454:

Table of Contents

Shelf and Backplane Hardware

ONS 15454 Software and Hardware Compatibility—XC

1. The XC card does not support features new to Release 5.0 and greater.

2. The shelf assemblies supported are 15454-SA-HD, 15454-SA-ANSI, and 15454-NEBS3E.

3. DS3 card having the part number 87-31-0001 does not work in Cisco ONS 15454 R8.0 and later.

4. ML-MR-10 and CE-MR-10 cards are not supported on XCVT.

5. Slots 1 to 4 and 14 to 17 give a total bandwidth of up to 622 Mb/s. Slots 5, 6 , 12 , and 13 give a total bandwidth of up to 2.5 Gb/s

6. These cards are designated as OC192-XFP in CTC.

or XC-VXC-10G cards for Releases 4.5, 4.6, 4.7, 5.0, 6.0, and 7.0. The 15454-SA-ANSI or

15454-SA-HD shelf assembly is required to operate the XC10G or XC-VXC-10G card. XC-VXC-10G

is only supported from Release 6.0. Refer to the older ONS 15454 documentation for compatibility with

older software releases.

Release 4.7 is for MSTP only. The cards supported in Release 4.7 are TCC2, TCC2P, and AIC , AIC-I.

Partially supported : Once a card has been through End Of Life(EOL), new features would not be

supported for the card. However bug fixes would be available.

ONS 15454 Software and Hardware Compatibility—XC10G and XC-VXC-10G Configurations

Fully compatible

Not supported

shows ONS 15454 software and hardware compatibility for systems configured with XC10G

4.6.0x (4.6)

Fully compatible

Not supported

and XCVT Configurations (continued)

Fully compatible

Not supported

5.0.0x (5.0)

6.0.0x (6.0)

Fully compatible

Not supported

Fully compatible

Cisco ONS 15454 Reference Manual, R7.0.1

1.18 1.18 Software and Hardware Compatibility

Fully compatible

Not supported

7.0.0x (7.0)

Fully compatible