Filler Card - Cisco ONS 15454 Reference Manual

1.13 1.13 Filler Card

Table 1-26
AMP Champ
Pin Number Signal Name
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
1.13 Filler Card
Filler cards are designed to occupy empty multiservice and AIC-I slots in the Cisco ONS 15454
(Slots 1–6, 9, and 12 – 17). The filler card cannot operate in the XC slots (Slots 8 and 10) or TCC slots
(7 and 11). When installed, the filler card aids in maintaining proper air flow and EMI requirements.
Note There are two types of filler cards, a detectable version (Cisco P/N 15454-FILLER) and a non-detectable
version (Cisco P/N 15454-BLANK). The detectable card has the label FILLER on the faceplate. The
non-detectable card has no faceplate label. In Software Release 6.0 and greater, the former card is
detectable through CTC when installed in the ONS 15454 shelf.
Figure 1-40
indicators.
Cisco ONS 15454 Reference Manual, R7.0.1
1-60
Pin Association for Alarm Output Pins (continued)
AMP Champ
Pin Number Signal Name
N.C. 33
COM_5 34
NO_5 35
N.C. 36
COM_7 37
NO_7 38
N.C. 39
COM_9 40
NO_9 41
N.C. 42
COM_11 43
NO_11 44
N.C. 45
COM_13 46
NO_13 47
N.C. 48
COM_15 49
NO_15 50
N.C. 51
NO_0 52
shows the faceplate of the detectable filler card. The filler cards have no card-level LED
Chapter 1
COM_4
N.C.
NO_6
COM_6
N.C.
NO_8
COM_8
N.C.
NO_10
COM_10
N.C.
NO_12
COM_12
N.C.
NO_14
COM_14
N.C.
N.C.
GND1
GND2
Shelf and Backplane Hardware
OL-9217-01