Cisco Ip Phone 8800 Series Administration Guide For Cisco Unified Communications Manager - Cisco 8800 Series Administration Manual

Item Description
Span to PC port Indicates whether the phone forwards packets that are transmitted and received on
the network port to the access port.
Video capability Indicates whether the phone can participate in video calls when it connects to an
enabled appropriately equipped camera.
Voice VLAN Indicates whether the phone allows a device that is attached to the PC port to access
enabled the Voice VLAN.
PC VLAN enabled VLAN that identifies and removes 802.1P/Q tags from packets that are sent to the
PC.
Auto line select Identifies if the phone automatically selects a line when the phone goes off hook.
enabled
DSCP protocol DSCP IP classification for call control signaling.
control
DSCP for DSCP IP classification for any phone configuration transfer.
configuration
DSCP for services DSCP IP classification for phone-based services.
Security mode Security mode that is set for the phone.
(nonsecure)
Web access enabled Indicates whether web access is enabled (Yes) or disabled (No) for the phone.
SSH access enabled Indicates if the SSH port has been enabled or disabled.
CDP: SW Port Indicates whether CDP support exists on the switch port (default is enabled).
Enable CDP on the switch port for VLAN assignment for the phone, power
negotiation, QoS management, and 802.1x security.
Enable CDP on the switch port when the phone connects to a Cisco switch.
When CDP is disabled in Cisco Unified Communications Manager, a warning is
presented, indicating that CDP should be disabled on the switch port only if the phone
connects to a non-Cisco switch.
The current PC and switch port CDP values are shown on the Settings menu.
CDP: PC Port Indicates whether CDP is supported on the PC port (default is enabled).
When CDP is disabled in Cisco Unified Communications Manager, a warning is
displays to indicate that disabling CDP on the PC port prevents CVTA from working.
The current PC and switch port CDP values are shown in the Settings menu.
LLDP-MED:SW Indicates whether Link Layer Discovery Protocol Media Endpoint Discovery
Port (LLDP-MED) is enabled on the switch port.

Cisco IP Phone 8800 Series Administration Guide for Cisco Unified Communications Manager

Cisco IP Phone Web Page
275