Set Up Client Matter Codes - Cisco 8800 Series Administration Manual

Step 4 Select Save.
Step 5
Select Apply Config.
Step 6 Restart the phone.

Set Up Client Matter Codes

You can use Client Matter Code (CMC) to identify clients or job functions. For more information, see the
documentation for your particular Cisco Unified Communications Manager release.
Procedure
Step 1 In Cisco Unified Communications Manager Administration, select Call Routing > Client Matter Codes.
Step 2 Configure the Require Client Matter Code field.
This check box controls whether the system prompts the user for a CMC upon placing a call.
Step 3 Select Save.
Related Topics
Cisco Unified Communications Manager Documentation, on page xvii
Set Up Forced Authorization Codes
Forced Authorization Codes (FACs) ensure that the user is authorized to make the call. For more information,
see the documentation for your particular Cisco Unified Communications Manager release.
Procedure
Step 1
In Cisco Unified Communications Manager Administration, select Call Routing > Forced Authorization
Code.
Step 2 Configure the following fields.
Field
Require Forced Authorization Code
Authorization Level
Step 3
Select Save.
Cisco IP Phone 8800 Series Administration Guide for Cisco Unified Communications Manager
Phone Feature Configuration
Description
Select the check box to require a user to enter an FAC.
The code that the user must enter to be authorized to
place the call.
213