Cisco Ip Phone 8800 Series Administration Guide For Cisco Unified Communications Manager - Cisco 8800 Series Administration Manual

Feature
Incoming Call Toast Timer
Intelligent Proximity
Intercom
IPv6 Support
Jitter Buffer
Join
Line Status for Call Lists
Description and more information
Allows you to set the length of time that an incoming call toast (notification) appears on
the phone screen.
See Incoming Call Toast Timer,
Enables users to pair a mobile device with the phone using Bluetooth and use the phone
to place and receive mobile calls,
See Enable Intelligent Proximity, on page
Cisco IP Phone 8811, 8841, and 8851NR do not support Bluetooth or Intelligent
Proximity.
Allows users to place and receive intercom calls using programmable phone buttons.
You can configure intercom line buttons to:
• Directly dial a specific intercom extension.
• Initiate an intercom call and then prompt the user to enter a valid intercom number.
If your user logs into the same phone on a daily basis using their Cisco Extension
Note
Mobility profile, assign the phone button template that contains intercom
information to their profile, and assign the phone as the default intercom device
for the intercom line.
Provides support for expanded IP addressing on Cisco IP Phones. With IPv6, dual-stack
configuration is recommended and fully supported. Certain features are not supported
in a standalone configuration. In dual-stack mode, the phone is able to communicate
using IPv4 and IPv6 simultaneously, independent of the content.
See Configure Network Settings, on page
The Jitter Buffer feature handles jitter from 10 milliseconds (ms) to 1000 ms for audio
streams.
It runs in an adaptive mode and it dynamically adjusts to the amount of jitter.
Allows users to combine two calls that are on one line to create a conference call and
remain on the call.
Allows the user to see the Line Status availability status of monitored line numbers in
the Call History list. The Line Status states are
• Offline
• Available
• In use
• Do not disturb
See Enable BLF for Call Lists, on page

Cisco IP Phone 8800 Series Administration Guide for Cisco Unified Communications Manager

Product Specific Configuration, on page
244.
49.
217.
Telephone Features
190.
179