Cisco Ip Phone 8800 Series Administration Guide For Cisco Unified Communications Manager - Cisco 8800 Series Administration Manual

https://<Unified-CM-server-name>:8443/ccmpd/login.do?name=#DEVICENAME#&service=fd
• Service Category: Select XML Service.
• Service Type: Select Directories.
• Enable: Select the check box.
http://<IP_address> or https://<IP_address> (Depends on the protocol that the Cisco IP Phone supports.)
Step 4 Select Save.
If you change the service URL, remove an IP Phone service parameter, or change the name of a
Note
phone service parameter for a phone service to which users are subscribed, you must click Update
Subscriptions to update all currently subscribed users with the changes; otherwise, users must
resubscribe to the service to rebuild the correct URL.
Related Topics
Cisco Unified Communications Manager Documentation, on page xvii
Modify Phone Button Template for PAB or Fast Dial
You can modify a phone button template to associate a service URL with a programmable button. Doing so
provides users with single-button access to the PAB and Speed Dials. Before you modify the phone button
template, you must configure PAB or Speed Dials as an IP Phone service.
For more information about IP Phone services and configuring line buttons, see the documentation for your
particular Cisco Unified Communications Manager release.
Procedure
Step 1 From Cisco Unified Communications Manager Administration, choose Device > Device Settings > Phone
Button Template.
Step 2 Click Find.
Step 3 Select the phone model.
Step 4 Select Copy, enter a name for the new template, and then select Save.
The Phone Button Template Configuration window opens.
Step 5 Identify the button that you would like to assign, and select Service URL from the Features drop-down list
that associates with the line.
Step 6 Select Save to create a new phone button template that uses the service URL.
Step 7 Choose Device > Phone and open the Phone Configuration window for the phone.
Step 8 Select the new phone button template from the Phone Button Template drop-down list.
Step 9
Select Save to store the change and then select Apply Config to implement the change.
The phone user can now access the Self Care Portal and associate the service with a button on the phone.

Cisco IP Phone 8800 Series Administration Guide for Cisco Unified Communications Manager

Phone Button Templates
239