Cisco Ip Phone 8800 Series Administration Guide For Cisco Unified Communications Manager - Cisco 8800 Series Administration Manual

Lockable Wall Mount Components for Phone
Before You Begin
Obtain two Phillips head screwdrivers or other similar devices that have a diameter of 5 millimeters or 3/16ths
of an inch.
Procedure
Step 1 Insert a screw driver or other device into the left and right holes in the phone mounting plate. Insert to a depth
of about 3/4 of an inch or 2 centimeters.
Step 2 Press firmly inwards to disengage the tabs.
Step 3 Lift the phone to release it from the wall bracket. Pull the phone toward you.
Lockable Wall Mount Components for Phone
This section describes how to install a wall mount for the Cisco IP Phone 8845, 8865, and 8865NR.
Figure 11: Wall Mount Kit for Single Phone Assembly
The package includes these items:

Cisco IP Phone 8800 Series Administration Guide for Cisco Unified Communications Manager

122