Disable Wired Headset - Cisco 8800 Series Administration Manual

Headsets
Procedure
Step 1 Plug the headset into the Headset port on the back of the phone.
Step 2 Press the Headset button on the phone to place and answer calls using the headset.

Disable Wired Headset

You can disable the headset by using Cisco Unified Communications Manager Administration. If you do so,
you also disable the speakerphone.
Procedure
Step 1 To disable the headset from Cisco Unified Communications Manager Administration, choose Device > Phone
and locate the phone that you want to modify.
Step 2 In the Phone Configuration window (Product Specific Configuration layout portion), select the Disable
Speakerphone and Headset check box.
USB Headsets
Wired and wireless USB headsets are supported. You can connect a USB headset (or the base station for a
wireless headset) to either the back USB port (if your phone has this port) or to the side USB port.
Enable USB Headset
You must enable the applicable USB port (either the back USB port parameter or the side USB port parameter)
in Cisco Unified Communications Manager Administration (in the Product Specific Configuration layout
portion of the window). Also, for the Enable/Disable USB Classes parameter in Cisco Unified Communications
Manager Administration, ensure that Audio Class is selected.
Procedure
Step 1
Enable the USB headset in one of the following windows:
• Phone Configuration (Device > Phone).
• Enterprise Phone Configuration (System > Enterprise Phone Configuration).
• Common Phone Profile window (Device > Device Settings > Common Phone Profile).
Step 2 Check the corresponding Override Common Settings parameter in the configuration window.
Cisco IP Phone 8800 Series Administration Guide for Cisco Unified Communications Manager
88