Cisco Ip Phone 8800 Series Administration Guide For Cisco Unified Communications Manager - Cisco 8800 Series Administration Manual

Connect a Single Key Expansion Module to a Cisco IP Phone
Cisco IP Phone 8851 and 8851NR
Accessories 802.3af 802.3at PoE
PoE
2 KEM Not Not
+ tablet supported supported
charging
3 KEM Not Not
+ tablet supported supported
charging
Smart Yes Yes
phone
charging
(No
KEM
attached)
Tablet Yes Yes
charging
Connect a Single Key Expansion Module to a Cisco IP Phone
Procedure
Step 1 Unplug the Ethernet cable from the phone.
Step 2 If installed, remove the footstand from the phone.
Step 3
Locate the accessory connector covers on the side of the phone.
This diagram shows the location.

Cisco IP Phone 8800 Series Administration Guide for Cisco Unified Communications Manager

96
Cisco IP Phone 8861
Cisco IP 802.3af 802.3at PoE
Phone PoE
Power Cube
4
Not Not Not
supported supported supported
Not Not Not
supported supported supported
Not Yes Yes
supported
Not Yes Yes
supported
Cisco IP Phone 8865 aand 8865NR
Cisco IP 802.3af PoE
Phone
Power Cube
4
Supported Not
supported
Supported Not
supported
Not Yes
supported
Not Yes
supported
802.3at PoE Cisco IP
Phone
Power Cube
4
Not Supported
supported
Not Supported
supported
Yes Yes
Yes Yes