Setting Up A Security Profile - NETGEAR WNDAP350 Reference Manual

- Port Number. The port number of the RADIUS Server. The default is 1812.
- Shared Secret. This is shared between the Wireless Access Point and the
RADIUS Server while authenticating the supplicant (wireless client).
• Accounting Server. This configuration is required for accounting using a RADIUS
Server. The IP Address, Port Number, and Shared Secret are required for
communication with the Primary RADIUS Server. You can also configure a
Secondary RADIUS Server to use if the Primary RADIUS Server fails.
- IP Address. The IP address of the RADIUS Server.
- Port Number. Port number of the RADIUS Server. The default: 1813
- Shared Secret. This is shared between the Wireless Access Point and the
RADIUS Server while authenticating the supplicant (wireless client).
4. Click Apply to save your settings.

Setting up a Security Profile

The WNDAP350 allows you to set up eight different security profiles for 802.11b/bg/ng and
eight different profiles for 802.11a/na. Each profile can be configured with a different security
option for network authentication.
Note: If you are using a RADIUS Server, configure the RADIUS settings first,
as described in the
Figure 17. Security profile settings
ProSAFE Dual Band Wireless N Access Point WNDAP350
Configuring the RADIUS Server Settings
Basic Installation and Configuration
39
on page 38.