Setting Your Ssid And Wireless Security Manually - NETGEAR WNR3500v2 - RangeMax Wireless N Gigabit Router Setup Manual

Setting Your SSID and Wireless Security Manually

To specify the wireless settings, you must know the following:
• SSID (wireless network name). The default SSID for the router is NETGEAR.
• The wireless mode (802.11g/b, or 802.11n) that each wireless adapter supports.
• Wireless security option. The router's default security setting is None, but NETGEAR
strongly recommends that you use wireless security.
To successfully implement wireless security, check each wireless device to determine which
wireless security option they support. Your wireless router and all wireless devices connected
to your wireless router must have the same security. For details on the various security options, see
the User Manual. A link to the User Manual is on your Resource CD
To set up basic wireless connectivity:
Log in to the wireless router by entering http://www.routerlogin.net or
1.
http://www.routerlogin.com in the address field of your browser. Enter the default user name
of admin and default password of password. Click Enter.
On the main menu, select Wireless Settings to display the Wireless Settings screen which
2.
includes your Wireless Network and Security Options settings.
Select a Wireless Network Name (SSID). The default SSID is NETGEAR.
3.
The SSID of any wireless adapters must match the SSID you configure in the
wireless router. If they do not match, you will not get a wireless connection.
Set the Region. Select the region where the router is located. (In the United States, the regions
4.
is preconfigured by default.)
Select a Channel. Usually it is not necessary to change the default channel settings unless you
5.
experience interference.
Leave the wireless Mode set to its default setting.
6.
By default, your Security Options are set to None. You can configure your security now (see
7.
"Setting Your SSID and Wireless Security Manually" on page 24
(WPS) to Configure Your Wireless Network" on page
and testing your basic Wireless Settings and then configure security.
Click Apply to save your changes.
8.
24
or "Using Push 'N' Connect
25) or you can complete configuring
Configuring Your Wireless Network